Welding schools · North Carolina
Welding schools in North Carolina: graduates earned about $35,200 in their first year
That figure is not the average welder wage. It is what people who found work actually earned after leaving 46 welding programs in North Carolina, out of 3,041 former students the state tracked and reported to the U.S. Department of Labor.
Welding programs are not all the same course. They range from a few weeks on a single skill to a year-long certificate, and the state figure mixes them. Use it as a starting point, then compare individual programs in the table below.
What stands out in North Carolina
- Among the ten states we cover for welding programs, North Carolina has the second-highest graduate earnings ($35,233).
- North Carolina's typical price ($2,180) is the lowest of the ten.
- Price and earnings are unrelated: the cheapest third of programs (typically $570) and the most expensive third (typically $4,316) reported almost the same earnings, $35,390 and $35,233.
- Finding work is not automatic: in 20 of 46 programs, fewer than 60% of leavers were employed six months later.
- Completion is a real hurdle here. The typical program reports that only 44% of students finish.
Public versus for-profit price
In North Carolina this training is mostly public: 37 of the 46 programs are at public or community colleges, with a typical price of $1,978. No for-profit program has usable data, so there is no price comparison to make.
How long until the course pays for itself
A simple yardstick: compare what leavers earned with a low-wage job in North Carolina, taken as the 25th-percentile wage for all occupations ($34,900). Leavers earned $333 a year more than that. At the typical price of $2,180, the course costs over 3 years of that difference. The gap over a low-wage job is small here, so this estimate swings widely with small changes in the earnings figure.
This is not a measured return: we do not know what students earned before, and living costs during the course are not counted.
North Carolina and its neighbours
North Carolina sits in the middle of its neighbours: behind South Carolina ($35,397), ahead of Georgia ($27,439). Wages and living costs differ across state lines, so read this as context, not as a reason to move.
| State | Earnings / yr | Typical cost | Programs |
|---|---|---|---|
| South Carolina | $35,397 | $5,941 | 7 |
| North Carolina | $35,233 | $2,180 | 46 |
| Virginia | $34,450 | $3,900 | 30 |
| Tennessee | $33,254 | $5,499 | 27 |
| Georgia | $27,439 | $6,140 | 24 |
Does the figure hold from one year to the next?
In the earlier edition of the same federal file (prepared in February 2024), applying the same rules, welding programs in North Carolina showed $27,826 across 25 programs: 27% higher now.
20 of the 36 named programs also appear in that edition with enough students measured. For the typical one, earnings rose by 24%; 9 programs moved by more than a quarter. The "Previous release" column in the table shows each one.
North Carolina's figures are unsteady from one edition to the next. Across all 710 training programs in the state, in any field, that appear in both editions, 36% changed their earnings figure by more than a quarter, up or down, and so did 49% of programs with 100 or more students measured. That points to changes in how the state measures, not only in what graduates earn. Treat a single program's figure here as rough, and compare programs on more than one number.
36 programs with enough data to name
Listed alphabetically. Only programs with at least 30 measured students are named. The state figures above also count 10 smaller or inconsistent records not listed here. Select a column heading to sort.
| Beaufort County Community CollegeWelding Technology · Washington | Community college | $411 | 4 | 27% | 68% | $36,801 | — | 34 |
| Blue Ridge Community CollegeWelding Technology Certificate · Flat Rock | Community college | $4,549 | 8 | 33% | 64% | $16,152 | $9,260 | 47 |
| Brunswick Community CollegeWelding Technology - Certificate · Supply | Public | $1,618 | 18 | 47% | 65% | $19,282 | $11,388 | 46 |
| Brunswick Community CollegeWelding Technology - Diploma · Supply | Public | $4,330 | 48 | 46% | 69% | $34,762 | $22,816 | 58 |
| Caldwell Community College and Technical InstituteWelding Technology Certificate · Hudson | Community college | $2,235 | 32 | 31% | 76% | $17,363 | — | 37 |
| Cape Fear Community CollegeWelding Technology · Wilmington | Community college | $4,681 | 42 | 33% | 76% | $35,233 | $28,474 | 142 |
| Central Carolina Community CollegeWelding Technology-Certificate · Sanford | Community college | $1,443 | 32 | 35% | 51% | $35,390 | $29,130 | 80 |
| Central Piedmont Community CollegeWelding Technology Certificate with a Specialization in Entry-Level Welding Certificate · Charlotte | Other | $3,966 | 16 | 50% | 68% | $38,783 | — | 31 |
| Cleveland Community CollegeWelding Technology Diploma · Shelby | Other | $4,257 | 42 | 28% | 69% | $55,811 | — | 42 |
| College of the AlbemarleWelding Technology Diploma · Elizabeth City | Community college | $4,045 | 42 | 53% | 54% | $28,920 | $13,379 | 141 |
| Craven Community CollegeNCCER Welding Level 1 & 2 Combo WFD/CE · New Bern | Public | $895 | 29 | 67% | 44% | $28,968 | — | 143 |
| Davidson-Davie Community CollegeWelding Technology (Certificates) · Thomasville | Community college | $1,978 | 8 | 36% | 47% | $18,225 | — | 173 |
| Davidson-Davie Community CollegeWelding Technology (Diploma) · Thomasville | Community college | $4,050 | 40 | 48% | 71% | $34,007 | — | 76 |
| Durham Technical Community CollegeWelding Technology Certificate · Durham | Community college | $1,747 | 16 | 23% | 66% | $32,996 | $27,759 | 77 |
| Fayetteville Technical Community CollegeTransition Tech Mobile Structural Pipe Welding · Fayetteville | Community college | $690 | 15 | — | 37% | $46,217 | — | 100 |
| Fayetteville Technical Community CollegeWelding Technology · Fayetteville | Community college | $4,012 | 48 | 28% | 61% | $42,319 | $28,587 | 165 |
| Forsyth Technical Community CollegeWelding Technology (Certificate) · Winston-salem | Public | $1,368 | 40 | 27% | 78% | $33,739 | $24,326 | 79 |
| Forsyth Technical Community CollegeWelding Technology (Diploma) · Winston-salem | Public | $3,344 | 52 | 38% | 83% | $35,301 | $20,879 | 76 |
| Forsyth Technical Community CollegeWelding, Industrial · Winston-salem | Public | $570 | 16 | 65% | 76% | $42,361 | — | 34 |
| Gaston CollegeWelding Technology Diploma · Dallas | Other | $6,998 | 48 | 65% | 80% | $46,447 | — | 113 |
| James Sprunt Community CollegeWelding Technology Diploma · Kenansville | Public | $5,040 | 32 | 36% | 68% | $43,221 | $31,473 | 53 |
| Martin Community CollegeWelding Certificate - SMAW (Stick), GMAW, MIG, GTAW (TIG) · Williamston | Community college | $180 | 32 | 23% | 23% | $20,405 | $21,568 | 66 |
| Mayland Community CollegeWelding Technology - Certificate · Spruce Pine | Other | $1,980 | 32 | 18% | 65% | $24,382 | $23,327 | 40 |
| Montgomery Community CollegeWelding · Troy | Community college | $212 | 16 | 72% | 48% | $45,737 | $36,856 | 67 |
| Piedmont Community CollegeWelding Technology · Roxboro | Public | $3,192 | 64 | 41% | 60% | $55,064 | $27,826 | 107 |
| Robeson Community CollegeWelding · Lumberton | Community college | $2,124 | 32 | 76% | 56% | $28,851 | — | 32 |
| Rockingham Community CollegeWelding Diploma · Wentworth | Community college | $2,917 | 40 | 49% | 78% | $38,818 | $31,132 | 80 |
| Rowan-Cabarrus Community CollegeWelding Technology Certificate · Salisbury | Other | $2,321 | 32 | 14% | 59% | $35,255 | — | 83 |
| Rowan-Cabarrus Community CollegeWelding Technology Diploma · Salisbury | Other | $4,316 | 48 | 19% | 56% | $26,326 | — | 46 |
| Sandhills Community CollegeWelding I · Pinehurst | Community college | $535 | 40 | 80% | 53% | $37,023 | — | 72 |
| Sandhills Community CollegeWelding II NCCER · Pinehurst | Community college | $285 | 40 | 79% | 52% | $37,023 | — | 73 |
| Surry Community CollegeWelding Technology Certificate · Dobson | Community college | $1,714 | 32 | 20% | 42% | $36,212 | $31,177 | 153 |
| Surry Community CollegeWelding Technology Diploma · Dobson | Community college | $4,255 | 52 | 57% | 73% | $38,544 | $31,690 | 44 |
| Wayne Community CollegeBasic Welding I WFD/CE · Goldsboro | Community college | $100 | 4 | 71% | 53% | $25,455 | — | 70 |
| Wayne Community CollegeWelding Technology Diploma · Goldsboro | Community college | $5,286 | 16 | 70% | 74% | $36,885 | $34,566 | 57 |
| Wilkes Community CollegeWelding Technology Diploma · Wilkesboro | Community college | $3,960 | 40 | 55% | 60% | $24,981 | $21,486 | 119 |
Cost is the price for a student not funded by a workforce grant, as the school listed it with the state; most schools did not change their listed price between the two releases, so ask the school for the current one. "Previous release" is the same program's earnings in the earlier edition of the federal file (— where the program was not in it or had too few students measured). "Students" is the number whose employment was checked; earnings are the median for those who were working. A program's earnings depend on who enrols and where they live as well as on the teaching; a low or high figure is not by itself a verdict on a school.
Before you enrol: certification
- There is no general government licence for welders. Employers hire on certification: a hands-on test in which you weld a sample to a written code and it is inspected. Many employers also run their own weld test at the interview.
- The most widely recognised credential is the American Welding Society Certified Welder. It is a performance test only; AWS says no prerequisite course is required, and the test is taken at an AWS Accredited Test Facility (AWS Certified Welder program).
- A certification covers the process and position you tested in (for example stick welding on plate, or TIG on pipe), not welding in general. Ask a school which certification tests are included in the price, and for which processes.
- Programs under the same name differ a lot in length, from a few weeks on one process to a year covering several. Compare the weeks and the processes taught, not only the price.
- Some kinds of work carry extra rules set by a state or city, such as structural or pressure-vessel welding. Check with the employer or the North Carolina agency that regulates that work.